Bulbul Writer m011x

    Status

    designed but not tested design needs to be validated and DRC needs to be run

    Overview

    the bulbul writer project is similar to project plapple however much simpler. The m0116/8 keyboards used alps switches and PCBs making a pcb retrofit easy. This project can reuse every piece of the old m0116/8 except for the PCB (which would be replaced). The USB ports are set up with a mux meaning only one can be used at a time but it at least allows you to choose which side.

    Specs

    • mcu: nrf52840
    • firmware: zmk
    • switch footprints: alps only
    • battery: default configured for 10440 (~AAA) LiFePo4
    • layout: compatible with either m0116 or m0118 layout
    • peripherals: FFC connector for MIP sharp display
    • VDD: 3.0V